All Categories
General Information
Traveling With XBoat

Traveling With XBoat

Recommended procedures for packing equipment and traveling with XBoat

Last updated on July 23, 2026

💡

All equipment fits into the Nanuk case when packed correctly! Use these annotated pictures to pack your kit correctly when going on the road. Check out the index table at the bottom of the article for more in depth descriptions of the equipment

Eight Kit (8+)

Above is an in-depth view of an Eight kit packed in the Nanuk 935 case. For travel, pack equipment as shown above and reference the index below for where to store hardware or other parts
Above is an in-depth view of an Eight kit packed in the Nanuk 935 case. For travel, pack equipment as shown above and reference the index below for where to store hardware or other parts

Quad Kit (4x)

Detailed view of the Quad kit (4x) packed in the Nanuk 935 case. All of the equipment fits perfectly in the case at once
Detailed view of the Quad kit (4x) packed in the Nanuk 935 case. All of the equipment fits perfectly in the case at once

Index

Description
Getting Started Guide - Comes with the kit and runs through how to set up the equipment. Not necessary to keep with the equipment!
Angle Reference Storage - slots designed to perfectly fit the 8 angle references included in the kit when it arrives
Wireless Charging Pad Storage - Slot designed to fit the wireless charging pads when placed side by side. Can be used to store tools or extra equipment if not traveling with charging pads
Rowing Monitor Storage - Area meant to store the four monitors arranged SCREEN TO SCREEN (monitor mount can scratch the screen protector when stored front to back).
Charging Cable Bundles - Bottom left pocket in the lid organizer used to hold the charging cable bundles. Great to store hardware in here if not traveling with cables
Eight Port Charging Adapter - Top left pocket in lid organizer used to transport the charging adapter
T-Brackets - Top right pocket in lid organizer is used to transport the T-Brackets. If leaving brackets on boat for travel, this can hold extra hardware or other equipment
Spare Bushings and Spacers / Dielectric Grease - Bottom right pocket in lid organizer holds the packets of extra and spacers, as well as a packet of dielectric grease for salt water users. Info on grease use can be found in the Salt Water Care page. Recommended to travel with these but great spot for extra hardware if not
Oarlock Storage - Area cut out to perfectly store 8 oarlocks in an alternating pattern as pictured. Recommended to only use this segment for oarlocks as other equipment can damage the foam
Angle Reference Tools - Proper Alan wrench used to adjust the angle reference screws. Good place for other wrenches if not traveling
 
Did this answer your question?
😞
😐
🤩
Changing Blade Length Rowing Shell Compatibility